washtub bass construction

A forum devoted to the discussion of playing bass with the blues.

washtub bass construction

Postby bottleneck » Sat Jan 24, 2004 12:44 am

howdy low end!!!
i really need your help here.
i've seen washtub basses made all different ways.with the broomstick attached with a hinge,or just leaning against.i've seen the clothesline tied around a handle and using the edge of the rim as a bridge,and i've also seen it come out of the middle,secured by a knot inside or an eye-hook outside.
what sounds best,and what makes hitting the right note easier?
bottleneck
Regular
 
Posts: 488
Joined: Thu Jan 01, 1970 12:00 am
Location: PHILADELPHIA

RE: washtub bass construction

Postby bosco » Sat Jan 24, 2004 2:24 pm

[updated:LAST EDITED ON Jan-24-04 AT 09:29 AM (EST)]Bottleneck-

The design on the attached webpage makes the most sense-

[link:www.ehhs.cmich.edu/~dhavlena/bass.htm|Washtub Bass Design]

A flat neck board is used instead of a broomstick and is actually bolted in two places to the side of the washstub as opposed to hinges or balancing. This provides additional resonance comparable to a guitar neck being bolted to the guitar body. A lever that hinges through the center of the neck to the string pivots to fluctuate the string tension for the notes. The string bottom attaches to the center of the tub which also seems like the logical design choice for maximum volume.

Unfortunately the details on the design page are illegible, but the illustration is sufficient to get the idea. Hope this helped-

Bosco

"The joy of living is his, who has the heart to demand it."
User avatar
bosco
Contributor
Contributor
 
Posts: 1505
Joined: Thu Mar 10, 2005 12:36 am
Location: Michigan

RE: washtub bass construction

Postby bottleneck » Mon Jan 26, 2004 8:44 am

thanks bosco that's a BIG help!!!!
bottleneck
Regular
 
Posts: 488
Joined: Thu Jan 01, 1970 12:00 am
Location: PHILADELPHIA

RE: washtub bass construction

Postby bosco » Mon Jan 26, 2004 12:23 pm

No problem, bro...let us know how your project evolves!

Bosco
User avatar
bosco
Contributor
Contributor
 
Posts: 1505
Joined: Thu Mar 10, 2005 12:36 am
Location: Michigan

RE: washtub bass construction

Postby guitarslim101 » Wed Jan 05, 2005 2:03 am

I am building one of those. It reminds me of the whammola...
User avatar
guitarslim101
Regular
 
Posts: 918
Joined: Fri Nov 26, 2004 3:50 am
Location: Nowheresville, MN

RE: washtub bass construction

Postby jaybird » Tue Jan 18, 2005 4:45 pm

Howdy,

This is the set up I built.

#2 wash tub, info on internet says #3 is best, but I get all the sound I need on a #2, get rid of the metal handles they rattle.

1 to 1 1/2" dowel (a spruce closet clothes hanging rod??)

Parachute cord

wood blocks screwed through the bottom edge of the rim for feet to lift the tub off the floor an inch or so.

Drilled 1/4" to 1/2" hole in center of tub. Sawed off couple of inches of the dowel drilled hole in same threaded parachute cord through dowel knotted it off, thread cord through hole in tub. Drilled hole at downward angle near top of dowel, now called a staff.
Sawed a notch in the bottom of the staff to fit over lip of tub bottom. Threaded cord through hole in top of staff and knotted it off. Now you can customize things like staff height and cord length. Also you will need to protect the cord form chaffing where it comes through the hole in the tub, I use a good layer of duct tape wrapped around the base of the cord at the hole. I also used a long piece of duct tape to hold the 2" dowel stopper thing up underneath the top of the tub.

Now you have your own original custom down home musical instrument.
Just don't let anyone get any photographic evidence of you playing this thing and you'll be o.k. Unless you are already a tobacco chewing, overall wearing hillbilly, in that case the wash tub bass is the perfect accessory for you. Hee Hee! They are fun and easy to play!

Thump On,

Jaybird
User avatar
jaybird
Contributor
Contributor
 
Posts: 5
Joined: Thu Jan 01, 1970 12:00 am

RE: washtub bass construction

Postby bosco » Tue Jan 18, 2005 11:47 pm

> Hee Hee! <

I'm sure you meant to say "Hee Haw."
User avatar
bosco
Contributor
Contributor
 
Posts: 1505
Joined: Thu Mar 10, 2005 12:36 am
Location: Michigan

RE: washtub bass construction

Postby david » Wed Jan 19, 2005 2:31 am

>Unless you are already
>a tobacco chewing, overall wearing hillbilly, in that case
>the wash tub bass is the perfect accessory for you.

Just how the heck do you know so much about me?
david
Contributor
Contributor
 
Posts: 658
Joined: Thu Mar 10, 2005 3:06 pm

RE: washtub bass construction

Postby ricochet » Wed Jan 19, 2005 2:34 am

We've seen pictures.
User avatar
ricochet
Regular
 
Posts: 10256
Joined: Thu Jan 01, 1970 12:00 am
Location: Bristol, Tennessee, USA

RE: washtub bass construction

Postby david » Wed Jan 19, 2005 2:08 pm

You're trying to make me paranoid, aren't you. Well, it won't work, I've known your plan all along.
david
Contributor
Contributor
 
Posts: 658
Joined: Thu Mar 10, 2005 3:06 pm

RE: washtub bass construction

Postby ricochet » Wed Jan 19, 2005 7:09 pm

Remember "Romper Room?" How the lady hosting the show used to look through her "Magic Mirror" and see every kid watching the show and call their names as it went off? Well, it works with computer monitors, too.
User avatar
ricochet
Regular
 
Posts: 10256
Joined: Thu Jan 01, 1970 12:00 am
Location: Bristol, Tennessee, USA

RE: washtub bass construction

Postby cas » Wed Jan 19, 2005 11:43 pm

Okay, I could make a joke about being able to see thru the computer and playing your Johnson, but....well, I'm afraid it'll get censored.

Carol }>
cas
 

RE: washtub bass construction

Postby ricochet » Thu Jan 20, 2005 3:58 am

Hmmm, tying that in with the blonde lady on Romper Room with the big beehive hairdo leads to some interesting mental images...
CENSORED
User avatar
ricochet
Regular
 
Posts: 10256
Joined: Thu Jan 01, 1970 12:00 am
Location: Bristol, Tennessee, USA

RE: washtub bass construction

Postby david » Thu Jan 20, 2005 6:46 pm

Romper stomper, bomper boo. Tell me tell me, tell me true.

Rico, was that YOU on the other side of that magic mirror dealie?
david
Contributor
Contributor
 
Posts: 658
Joined: Thu Mar 10, 2005 3:06 pm

RE: washtub bass construction

Postby ricochet » Thu Jan 20, 2005 7:37 pm

I was on one side of it.
User avatar
ricochet
Regular
 
Posts: 10256
Joined: Thu Jan 01, 1970 12:00 am
Location: Bristol, Tennessee, USA

Next

Return to Bass - Meet Me At The Bottom

Who is online

Users browsing this forum: No registered users and 1 guest

cron