Page 1 of 1

Roller nut... Screws or Glue?

PostPosted: Fri Jun 19, 2009 7:07 am
by savage
I'm gonna be puttin together my ideal cheapo guitar.... I am basically putting a guitar that suits my playing better (without spending a fortune)--- P90's, bigsby, roller nut, & locking tuners to start. I am gonna install a B-5 on a "stop-bar" axe. My only question is... Is there any noticable difference between the Fender LSR roller nuts and the wilkinson ones that glue on? My tele that I sold had a fender LSR and I thought it worked fine so that would be my first instinct. Just curious...

Re: Roller nut... Screws or Glue?

PostPosted: Fri Jun 19, 2009 8:58 pm
by 1dustyeod
I prefer the LSR's also if that makes any difference friend. I think they're a lot smoother.
8) :wink: 8)

Re: Roller nut... Screws or Glue?

PostPosted: Tue Jun 30, 2009 6:36 pm
by unquashable
I don't know about the two nuts in question, but I do know that I would not be in any hurry to glue hardware to a guitar. Screws tend to be fairly easy to undo but when one glues something down it becomes more challenging to replace, repair or remove.